HENGEGROUP

KOMINEX

PROCESSING/RECYCLING

C

Products

Processing/recycling

Service/Quality

Contact

Processing/Recycling

Landfill costs don’t have to be! We take over your recyclable residual materials for further use throughout Europe.

The legal basis for our work is always guaranteed by the existence of all permits for the proper disposal and recycling of cutting, blasting and grinding waste. Our on-site technical team has the necessary broad expert knowledge to develop optimal solutions for your disposal tasks.

KOMINEX Minerals+Processing has had an EMAS-certified environmental management system for many years. Compared to ISO 14001 (“Environmental ISO”), this certificate according to EU standards is even more precise and demanding with regard to ecological aspects.

In addition, we have also been an officially certified waste management company since 2017, which means we can offer you all the important services on the subject of waste, disposal and recycling.

Garnet sand residues
Grinding wheel breakage/ Dressing dust
Contract preparation

We take over your garnet sand residues! It doesn’t matter whether wet used cutting sand accumulates in your company or is the result of blasting. On our tried and tested plants, we are able to efficiently dry, clean, dedust and sieve the residual materials to a wide range of grain sizes. The end product is our high-quality KOMINEX garnet sand, which is ideally suited for all common applications and represents a first-class alternative to original garnet sand.

To check the usability of your garnet sand residue, all our technical experts need is a small representative sample (300-500 grams) and some verbal or written information about the source. Following our rapid analysis, which is free of charge, you will receive a direct and competent statement on the usability of your residual materials. After the positive result, we immediately organise the complete processing of the waste material acceptance and issue all the necessary documents, so that there is no additional work for you.

Ceramic grinding wheel breakage/ dressing dust

Regardless of whether it’s broken grinding wheels from vitrified bonded grinding tools, calibration dusts in various finenesses or otherwise accumulated abrasive grain surplus from your production, we are happy to take on your residual materials. Our various crushing, grinding, drying and screening plants efficiently process all ceramic-bonded residues into our KOMINEX mixed corundum. The right combination of raw materials and an effective screening technique allow the grinding residues to be processed into a wide range of grain sizes, which can also be produced according to customer requirements.

Depending on the residual material, we only need a detailed description and illustration of the residual material in order to be able to make a statement on its recyclability. In the case of fine grain sizes (e.g. calibration dusts), the usability can be assessed most quickly by analysing a small sample (300-500 grams). The consultation and determination of usability as well as the preparation of our offer are, of course, free of charge for you. Our team will assist you in all possible ways with the coordination and handling of your waste material acceptance.

We are also always happy to take on used blasting media. All types of corundum and SiC materials can be easily processed on our equipment according to customer requirements. Simply send us a representative sample (300-500 grams) and we will quickly inform you about the usability of your material. In addition to the reprocessing of grinding tools with a ceramic bond, we are also able to recycle synthetic resin-bonded grinding tools in certain cases.

We will be happy to inform you about our possibilities in a personal conversation. We will also be happy to check your enquiries regarding the purchase of other minerals and a possible contract processing for you at any time and inform you about our possibilities.

Garnet sand residues

 

 

 

Product info

We take over your garnet sand residues! It doesn’t matter whether wet used cutting sand accumulates in your company or is the result of blasting. On our tried and tested plants, we are able to efficiently dry, clean, dedust and sieve the residual materials to a wide range of grain sizes. The end product is our high-quality KOMINEX garnet sand, which is ideally suited for all common applications and represents a first-class alternative to original garnet sand.

To check the usability of your garnet sand residue, all our technical experts need is a small representative sample (300-500 grams) and some verbal or written information about the source. Following our rapid analysis, which is free of charge, you will receive a direct and competent statement on the usability of your residual materials. After the positive result, we immediately organise the complete processing of the waste material acceptance and issue all the necessary documents, so that there is no additional work for you.

Grinding wheel breakage/ Dressing dust

 

 

 

Product info

Ceramic grinding wheel breakage/ dressing dust

Regardless of whether it’s broken grinding wheels from vitrified bonded grinding tools, calibration dusts in various finenesses or otherwise accumulated abrasive grain surplus from your production, we are happy to take on your residual materials. Our various crushing, grinding, drying and screening plants efficiently process all ceramic-bonded residues into our KOMINEX mixed corundum. The right combination of raw materials and an effective screening technique allow the grinding residues to be processed into a wide range of grain sizes, which can also be produced according to customer requirements.

Depending on the residual material, we only need a detailed description and illustration of the residual material in order to be able to make a statement on its recyclability. In the case of fine grain sizes (e.g. calibration dusts), the usability can be assessed most quickly by analysing a small sample (300-500 grams). The consultation and determination of usability as well as the preparation of our offer are, of course, free of charge for you. Our team will assist you in all possible ways with the coordination and handling of your waste material acceptance.

Contract preparation

 

 

 

Product info

Processing of other mineral residues

We are also always happy to take on used blasting media. All types of corundum and SiC materials can be easily processed on our equipment according to customer requirements. Simply send us a representative sample (300-500 grams) and we will quickly inform you about the usability of your material. In addition to the reprocessing of grinding tools with a ceramic bond, we are also able to recycle synthetic resin-bonded grinding tools in certain cases.

We will be happy to inform you about our possibilities in a personal conversation. We will also be happy to check your enquiries regarding the purchase of other minerals and a possible contract processing for you at any time and inform you about our possibilities.